-h --help Print help information -T --tcp Use TCP SYN for tracerouting (default port is 80) -U --udp Use UDP SYN for tracerouting (default port is 53) -F --fast-trace One-Key Fast Trace to China ISPs -p --port Set the destination port to use. It is either initial udp port value for "default"method (incremented by each probe, default is 33434), or initial seq for "icmp" (incremented as well, default from 1), or some constantdestination port for other methods (with default of 80 for "tcp", 53 for "udp", etc.) -q --queries Set the number of probes per each hop. Default: 3 --parallel-requests Set ParallelRequests number. It should be 1 when there is a multi-routing. Default: 18 -m --max-hops Set the max number of hops (max TTL to be reached). Default: 30 -d --data-provider Choose IP Geograph Data Provider [IP.SB, IPInfo, IPInsight, IP-API.com, Ip2region, IPInfoLocal, CHUNZHEN]. Default: LeoMoeAPI -n --no-rdns Do not resolve IP addresses to their domain names -a --always-rdns Always resolve IP addresses to their domain names -P --route-path Print traceroute hop path by ASN and location -r --report output using report mode --dn42 DN42 Mode -o --output Write trace result to file (RealTimePrinter ONLY) -t --table Output trace results as table --raw An Output Easy to Parse -c --classic Classic Output trace results like BestTrace -f --first Start from the first_ttl hop (instead from 1). Default: 1 -M --map Disable Print Trace Map -v --version Print version info and exit -s --source Use source src_addr for outgoing packets -D --dev Use the following Network Devices as the source address in outgoing packets -R --route Show Routing Table [Provided By BGP.Tools] -z --send-time Set the time interval for sending every packet. Useful when some routers use rate-limit for ICMP messages. Default: 100 -i --ttl-time Set the time interval for sending packets groups by TTL. Useful when some routers use rate-limit for ICMP messages. Default: 500 --_positionalArg_nexttrace_25 IP Address or domain name --dot-server Use DoT Server for DNS Parse [dnssb, aliyun, dnspod, google, cloudflare] -g --language Choose the language for displaying [en, cn]. Default: cn
